Make Face Shields using a 3d printer

Here’s a free design for making face shields to give away or sell at material cost.

https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc3

Edit: Disinfection guidelines from Prusa: https://help.prusa3d.com/en/article/prusa-face-shield-disinfection_125457

Edit 2: Here’s a design that’s approved by NIH. https://3dprint.nih.gov/discover/3dpx-013238

https://www.prusa3d.com/covid19/

I found this for the clear plastic shield part because I don’t have a laser cutter:

https://www.mybinding.com/10mil-crystal-clear-covers.html?sku=TC108.3X11.7S

I don’t know if that material will work or not. I hope so. I will keep you updated. The materials arrive on Monday. I ordered them on the 23rd.

Print Friendly, PDF & Email

Leave a Reply